Grease Trap Requirements
Surprise, AZ

FOG Compliance in Surprise, AZ

Food service establishments in Surprise operate under a combination of federal EPA pretreatment standards, Arizona state plumbing code, and city-level FOG ordinances. Together these rules determine how grease traps must be sized, how often they must be pumped, and what happens when a restaurant falls out of compliance.

Pumping frequency is the compliance rule restaurant owners interact with most often. In Surprise, the rule is: Per pretreatment program requirements. This aligns with the 90-day US median enforced by most major cities. The city follows the International Plumbing Code (IPC) for trap sizing and installation. Under Section 1003.3.4, which sizes traps by drainage fixture unit counts, grease interceptors installed in Surprise must meet minimum capacity thresholds based on the fixtures connected to them — 3-compartment sinks, dishwashers, pre-rinse stations, wok stoves, and floor drains on the cook line. The local minimum trap size is: Per Arizona Plumbing Code (IPC-based) and city pretreatment guidelines; gravity grease interceptor sized per establishment.

Surprise requires a dedicated FOG permit for any food service establishment generating fats, oils, and grease. The annual permit fee is Per city Water Resource Management Pretreatment Program; contact Surprise Water Department. The permit is separate from, and in addition to, the plumbing permit required at installation. Violations carry maximum penalties of Per city pretreatment enforcement provisions; contact Water Resource Management . Fines typically escalate with repeat violations, and severe discharges that cause sanitary sewer overflows can trigger federal Clean Water Act penalties layered on top of local fines.

Surprise enforces the 25 percent rule: grease traps must be pumped before the combined FOG and settled solids reach 25 percent of the trap's total liquid depth. Inspectors measure the depth with a sludge judge or dipstick, typically at surprise visits. Exceeding the threshold at inspection triggers a notice of violation and mandatory emergency pump-out, regardless of the scheduled pumping cycle. Inspections by city Pretreatment Program staff. Establishments must maintain pumping logs, hauler manifests, and inspection reports on-site — missing records is itself a violation in most enforcement actions. Enforcement authority rests with the City of Surprise Water Resource Management / Pretreatment Program, which handles permit issuance, inspections, and hauler licensing.

For a deeper explanation of the rules this city enforces, read our guides on how grease traps work and the 25/50 pumping rule.