Grease Trap Requirements
Elk Grove, CA

FOG Compliance in Elk Grove, CA

Food service establishments in Elk Grove operate under a combination of federal EPA pretreatment standards, California state plumbing code, and city-level FOG ordinances. Together these rules determine how grease traps must be sized, how often they must be pumped, and what happens when a restaurant falls out of compliance.

Pumping frequency is the compliance rule restaurant owners interact with most often. In Elk Grove, the rule is: Per 25% rule. This aligns with the 90-day US median enforced by most major cities. The city follows the Uniform Plumbing Code (UPC) for trap sizing and installation. Under Section 1014, which applies a fixture drainage load formula with a retention time factor, grease interceptors installed in Elk Grove must meet minimum capacity thresholds based on the fixtures connected to them — 3-compartment sinks, dishwashers, pre-rinse stations, wok stoves, and floor drains on the cook line. The local minimum trap size is: Per California Plumbing Code (UPC-based); sized per CPC subject to approval by FOG Control Program Manager.

Elk Grove requires a dedicated FOG permit for any food service establishment generating fats, oils, and grease. The annual permit fee is Plumbing permit through Elk Grove Building Division; contact for current fee. The permit is separate from, and in addition to, the plumbing permit required at installation. Violations carry maximum penalties of Per Sacramento Area Sewer District / Regional San enforcement; up to $2,000–$5,000 per day for violations (CA standard) , in line with typical US municipal penalties. Fines typically escalate with repeat violations, and severe discharges that cause sanitary sewer overflows can trigger federal Clean Water Act penalties layered on top of local fines.

Elk Grove enforces the 25 percent rule: grease traps must be pumped before the combined FOG and settled solids reach 25 percent of the trap's total liquid depth. Inspectors measure the depth with a sludge judge or dipstick, typically at surprise visits. Exceeding the threshold at inspection triggers a notice of violation and mandatory emergency pump-out, regardless of the scheduled pumping cycle. Periodic inspections by Sacramento Area Sewer District (SacSewer). Establishments must maintain pumping logs, hauler manifests, and inspection reports on-site — missing records is itself a violation in most enforcement actions. Enforcement authority rests with the Sacramento Area Sewer District (SacSewer) / Sacramento Regional County Sanitation District (Regional San) / City of Elk Grove, which handles permit issuance, inspections, and hauler licensing.

For a deeper explanation of the rules this city enforces, read our guides on how grease traps work and the 25/50 pumping rule.