Grease Trap Requirements
Myrtle Beach, SC
FOG compliance regulations for food service establishments in Myrtle Beach, South Carolina.
FOG Compliance in Myrtle Beach, SC
Food service establishments in Myrtle Beach operate under a combination of federal EPA pretreatment standards, South Carolina state plumbing code, and city-level FOG ordinances. Together these rules determine how grease traps must be sized, how often they must be pumped, and what happens when a restaurant falls out of compliance.
Pumping frequency is the compliance rule restaurant owners interact with most often. In Myrtle Beach, the rule is: Annual. This is more lenient than the US median, typical of jurisdictions with lower-volume food service sectors. The city follows the International Plumbing Code (IPC) for trap sizing and installation. Under Section 1003.3.4, which sizes traps by drainage fixture unit counts, grease interceptors installed in Myrtle Beach must meet minimum capacity thresholds based on the fixtures connected to them — 3-compartment sinks, dishwashers, pre-rinse stations, wok stoves, and floor drains on the cook line.
Myrtle Beach requires a dedicated FOG permit for any food service establishment generating fats, oils, and grease. The permit is separate from, and in addition to, the plumbing permit required at installation.
Myrtle Beach enforces the 25 percent rule: grease traps must be pumped before the combined FOG and settled solids reach 25 percent of the trap's total liquid depth. Inspectors measure the depth with a sludge judge or dipstick, typically at surprise visits. Exceeding the threshold at inspection triggers a notice of violation and mandatory emergency pump-out, regardless of the scheduled pumping cycle. Establishments must maintain pumping logs, hauler manifests, and inspection reports on-site — missing records is itself a violation in most enforcement actions. Enforcement authority rests with the Grand Strand Water and Sewer Authority (GSWSA), which handles permit issuance, inspections, and hauler licensing.
For a deeper explanation of the rules this city enforces, read our guides on how grease traps work and the 25/50 pumping rule.
Pumping Requirements
Permits & Enforcement
Complete FOG Regulations
| Pumping Frequency | Annual |
|---|---|
| 25% Rule | Yes — trap must be pumped when grease and solids reach 25% of capacity |
| Permit Required | Yes |
| Record Keeping | Required — maintain pumping logs and manifests on-site |
| Plumbing Code | International Plumbing Code (IPC) |
| Authority | Grand Strand Water and Sewer Authority (GSWSA) |
Additional Notes
Annual pumping minimum. GSWSA manages wastewater for Myrtle Beach area.
Last verified: — Regulations change frequently. Always verify current requirements with your local wastewater authority or plumbing inspector before making compliance decisions.
Contact Information
Grand Strand Water and Sewer Authority: (843) 443-8200
Official Sources
Size Your Grease Trap for Myrtle Beach
Our free calculator uses IPC code requirements to recommend the right size.
Open Calculator