Grease Trap Requirements
Lexington, KY
FOG compliance regulations for food service establishments in Lexington, Kentucky. Serving 813 food service establishments.
FOG Compliance in Lexington, KY
Food service establishments in Lexington operate under a combination of federal EPA pretreatment standards, Kentucky state plumbing code, and city-level FOG ordinances. Together these rules determine how grease traps must be sized, how often they must be pumped, and what happens when a restaurant falls out of compliance. The city has approximately 813 food service establishments — every one of them subject to the rules summarized below.
Pumping frequency is the compliance rule restaurant owners interact with most often. In Lexington, the rule is: External interceptors: every 6 months minimum. This aligns with the 90-day US median enforced by most major cities. The city follows the International Plumbing Code (IPC) for trap sizing and installation. Under Section 1003.3.4, which sizes traps by drainage fixture unit counts, grease interceptors installed in Lexington must meet minimum capacity thresholds based on the fixtures connected to them — 3-compartment sinks, dishwashers, pre-rinse stations, wok stoves, and floor drains on the cook line. The local minimum trap size is: 1,000 gallons.
Lexington requires a dedicated FOG permit for any food service establishment generating fats, oils, and grease. The annual permit fee is Contact LFUCG Water Quality for current fees. The permit is separate from, and in addition to, the plumbing permit required at installation.
Lexington enforces the 25 percent rule: grease traps must be pumped before the combined FOG and settled solids reach 25 percent of the trap's total liquid depth. Inspectors measure the depth with a sludge judge or dipstick, typically at surprise visits. Exceeding the threshold at inspection triggers a notice of violation and mandatory emergency pump-out, regardless of the scheduled pumping cycle. Post-installation inspection required; ongoing compliance monitoring. Establishments must maintain pumping logs, hauler manifests, and inspection reports on-site — missing records is itself a violation in most enforcement actions. Enforcement authority rests with the Lexington-Fayette Urban County Government (LFUCG), Division of Water Quality, which handles permit issuance, inspections, and hauler licensing.
For a deeper explanation of the rules this city enforces, read our guides on how grease traps work and the 25/50 pumping rule.
Pumping Requirements
Permits & Enforcement
Complete FOG Regulations
| Minimum Trap Size | 1,000 gallons |
|---|---|
| Pumping Frequency | External interceptors: every 6 months minimum; internal under-counter traps: weekly to daily for high-volume |
| 25% Rule | Yes — trap must be pumped when grease and solids reach 25% of capacity |
| Permit Required | Yes |
| Permit Fee | Contact LFUCG Water Quality for current fees |
| Inspections | Post-installation inspection required; ongoing compliance monitoring |
| Record Keeping | Required — maintain pumping logs and manifests on-site |
| Plumbing Code | International Plumbing Code (IPC) |
| Authority | Lexington-Fayette Urban County Government (LFUCG), Division of Water Quality |
Additional Notes
All grease interceptors must be pre-approved by LFUCG Water Quality before installation. Maintenance records must include date, person performing maintenance, volume of grease removed, disposal location, and manager signature.
Last verified: — Regulations change frequently. Always verify current requirements with your local wastewater authority or plumbing inspector before making compliance decisions.
Contact Information
Lexington Department of Water Quality: (859) 425-2400
Official Sources
Size Your Grease Trap for Lexington
Our free calculator uses IPC code requirements to recommend the right size.
Open Calculator